Expert Garbage Disposal Repair Coronado
Jamming could mean some material stuck up somewhere in the Garbage disposal unit. Therefore, you will have to turn it off. Thereafter, you have to check the unit in order to find out the material that is stuck in the grinding chamber. Turn it back on. It should work just fine.
Coronado Appliance Repair for You!
The second step is to turn it off. Followed by inserting into its bottom a tool referred to as the “unjamming” tool. Then turn this tool clockwise. After some time, the tool will turn freely. This is an indication that the Coronado Appliance Garbage Disposal has been freed from the jam it initially had. You can so easily remove the material that was causing the jam and turn the Garbage disposal back on. It should work just fine!
The third step you can use to clear the jamming is the reset method. This is normally applicable where the Garbage disposal is completely dead. There is a red reset button that is situated towards the disposal unit’s bottom. Simply press it. It should help clear the jam. If the jam persists, then you will have to redo steps 2 and 3.
General Tip – it is advisable that you keep water running in the garbage disposal every time you are using it.
Garbage Disposal Tips
Make frequent use of your garbage disposal since this help eliminate the buildup of waste under the sink.
The usage of electricity on a garbage disposal is minimal. It however takes a shorter duration.
The use of water may vary though it is considerably low.